EAC certification
EAC certification
Currently there is no uniform official list of all products that are subject to certification, as the obligation for certification is currently regulated by a series of standards. This includes:
Technical Regulations of the Eurasian Economic Union (TR EAEU)
Technical Regulations of Russian Federation (TR RF)
GOST standards for those products not regulated within the EAEU or if rules have not come into effect yet
According to federal law № 184 "On Technical Regulation", the Technical Regulation is a document intended to set the properties of products or services as well as the processes and methods of manufacturing procedures relating thereto.
At the end of 2012, the Russian Federal Office for Technical Regulation and Metrology (Rosstandart) developed a consolidated list of products that are subject to certification and declaration according to the new Technical Regulations of the Eurasian Economic Union. Please note that this list is for informational purposes only.
List of products that are subject to EAC certification under the new Technical Regulations of the Eurasian Economic Union.
Machinery and equipment
TR
TR СU 004/2011 On safety of low-voltage equipment
The Technical Regulation describes the safety requirements for low-voltage devices and applies to all devices intended for alternating current of 50 to 1000 volts and direct current of 75 to 1500 volts. Products requiring certification include, for example, electrical household appliances, cables, electrical distributors, etc.
TR CU 016/2011 On safety of appliances burning gaseous fuels
TR CU 016/2011 On safety of appliances burning gaseous fuels
This Technical Regulation applies to equipment intended for food preparation, heating, hot water supply, for block-type combustion engines and gas-powered equipment with block-type combustion engines. Depending on the nature of the equipment, EAC certification is mandatory
TR CU 012/2011 On safety of the equipment for operation in explosive atmospheres
TR CU 012/2011 On safety of the equipment for operation in explosive atmospheres
The Technical Regulation TR CU 012/2011 describes the safety requirements for electrical and non-electrical equipment for operation in potentially explosive atmospheres. Those products require the mandatory EAC EX certificate.
TR CU 020/2011 On electromagnetic compatibility of technical devices
TR CU 020/2011 On electromagnetic compatibility of technical devices
The Technical Regulation TR CU 020/2011 applies to all devices that could generate electromagnetic interference or to those whose functionality is dependent on the influence of external electromagnetic interference. EAC certification is required, for example, for electrical household appliances, electrical tools or electronic musical instruments.
TR CU 010/2011 On safety of machinery and equipment
TR CU 010/2011 On safety of machinery and equipment
The Technical Regulation TR CU 010/2011 sets minimum requirements for the safety of machines and equipment during their entire service lives: during their construction, manufacture, installation, storage, transport, commissioning, operation, decommissioning and disposal. Depending on the nature of the product, the conformity is confirmed by an EAC certificate or an EAC declaration.
TR CU 032/2013 On safety of pressure equipment
TR CU 032/2013 On safety of pressure equipment
The Technical Regulation TR CU 032/2013 specifies the uniform safety requirements for the pressure equipment and their identification. The EAC certification obligation applies to pressure equipment of the third and fourth category.
Energy consuming devices
TR EAEU 048/2019 Requirements for the energy efficiency of energy consuming devices
TR EAEU 048/2019 Requirements for the energy efficiency of energy consuming devices
TR 048/2019 defines the minimal requirements for energy-consuming devices with regard to their energy efficiency. The fulfillment of those requirements is to be confirmed by an EAC certificate or an EAC declaration.
Rail vehicles and railway infrastructure
TR СU 001/2011 On safety of rail vehicles
TR СU 001/2011 On safety of rail vehicles
According to TR CU 001/2011 rail vehicles must prove their conformity to the technical regulation with an EAC certificate or an EAC declaration.
TR CU 002/2011 On safety of high speed trains
TR CU 002/2011 On safety of high speed trains
The Technical Regulation has been developed with the aim of monitoring the safety of high-speed trains and their individual parts and prescribes the mandatory certification of these.
TR СU 003/2011 On safety of railway infrastructure
TR СU 003/2011 On safety of railway infrastructure
This Technical Regulation describes the safety requirements for railway infrastructure: rails, power supply, telecommunication, facilities and buildings, as well as their individual parts.
EAEU 043/2017 On requirements for fire retardants and fire-extinguishing systems
The technical rules stipulate safety requirements for fire retardants, fire safety and firefighting equipment. Either an EAC certificate or a declaration is required.
Equipment for personal protection
TR CU 019/2011 On safety of personal protective equipment
TR CU 019/2011 On safety of personal protective equipment
This Technical Regulation ensures the necessary level of protection against harmful factors and the absence of impermissible risks which could lead to situations which are dangerous. It contains rules about water production, package, storage, transportation and distribution. The certification obligation applies to the protective equipment of hazard class 2.
Explosives
TR CU 028/2012 On safety of explosives and products on their basis
TR CU 028/2012 On safety of explosives and products on their basis
The Technical Regulation contains binding requirements for the manufacture, application, storage and transport of explosives and products based thereon. The conformation of conformity only takes place in the form of the EAC certification.
Elevators
TR CU 011/2011 Elevator safety
TR CU 011/2011 Elevator safety
In accordance with the technical requirements of TR CU 011/2011, elevators must be designed, produced and installed in such a way as to ensure safety during their service lives. Conformity assessment by means of an EAC certificate is mandatory.
Motorways and wheeled vehicles
TR CU 014/2011 On safety of motorways
TR CU 014/2011 On safety of motorways
The TR CU 014/2011 serves the harmonisation with the European directives regarding the safety of motor roads and provides for the EAC certificate or declaration as a mandatory form of conformity assessment.
TR CU 018/2011 On safety of wheeled vehicles
TR CU 018/2011 On safety of wheeled vehicles
The purpose of the Technical Regulation TR CU 018/2011 is both to ensure a socially acceptable level of safety in the operation of motor vehicles, as well as to coordinate with international technical standards of safety requirements for the vehicles. Certification is required above all for safety-relevant individual parts.
